A CRITICAL ENVIRONMENTAL ANALYSIS OF STRATEGIC MATERIALS TOWARDS ENERGY TRANSITION

Global consumption of materials is rising rapidly leading to an increase in environmental impacts associated with the supply chain. Similar issues also affect a set of materials strategic for the transition towards a sustainable energy production and distribution system: i.e. materials employed in renewable energy (wind turbines and photovoltaic panels), energy storage, electrolysers, electricity distribution networks and electric vehicle charging infrastructure. The analysis identifies, maps and de-fines a priority hierarchy for the environmental risks generated along the life-cycle of strategic raw materials. Standard construction material such as iron, steel and concrete showed the lowest environmental risks whereas platinum and iridium presented by far the highest impacts (respectively about 24.100 and 14.700 kg CO2 eq, 354.000 and 216.000 MJ, and 140 and 83 m3 of water for 1 kg of raw material). Recycled materials have shown to enable the lowering of the environmental risk associated with some raw material production processes (i.e. copper, lead, aluminium, nickel, manganese), whereas specific materials (i.e. platinum, iridium, indium, dysprosium) and related applications will need to be monitored to guarantee a sustainable transition towards renewable energies

Inverse Estimation of Temperature Profiles in Landfills Using Heat Recovery Fluids Measurements

In addition to leachate and gas emission analysis, temperature variations in municipal solid waste landfills are routinely monitored for safety and health reasons, such as the increased production of biogas or the danger of spontaneous combustion phenomena if the temperature exceeds 70–75°C. The increasing constraints on greenhouse gas emissions and the convenience of fuel and heat recovery have helped develop a global approach to landfills' operation and maintenance, generally referred to as bioreactor landfill management. The heat recovery piping we are presently designing can be a significant part of this approach. The heat gained by a fluid circulated in a closed network through the landfill is transferred to an external heat exchanger or used directly as warm water. Additionally, it can help reduce landfill temperature levels and control biogas generation. Since the pipes diameter is large enough to allow for a radial temperature gradient, this information can be used for an inverse estimation of the temperature profile in the landfill which constitutes the boundary conditions of the resulting heat transfer problem. In this paper, we describe an algorithm for regularising the resulting ill-posed free boundary estimation problem using sampled data of the heat recovery fluid on exiting the landfill

Life Cycle Assessment of a Circular Economy Process for Tray Production via Water-Based Upcycling of Vegetable Waste

With one-third of food being wasted at the various steps of the value chain, there is a large amount of biomass constantly being discarded, also wasting the resources consumed for its production. Several strategies have been proposed to use this biomass as a source of raw materials for the production of plastic alternatives, but the environmental impact parameters have rarely been estimated to understand if the proposed process provides an overall benefit. The purpose of this paper is to analyze, through an experimental laboratory campaign, the production process of a vegetable biocomposite material obtained by valorization of biomass from two sources: unsold vegetables from a wholesale market and carrot pomace obtained as a byproduct of juicing. The obtained biocomposite films were thermoformed into trays to replace the traditional plastic food containers made principally with PET. Different scenarios for the lab-scale production of trays were evaluated by testing two water-based processing methods for the two types of biomass used. In order to understand which of the four scenarios was the least impactful, the global warming potential, the cumulative energy demand, and the water scarcity index were used as indicators. Among the different lab-scale processing scenarios for the upscaling of vegetable waste, the least impactful was starting from the unsold/discarded vegetables collected at the wholesale market that were processed via water-based hydrolysis catalyzed by formic acid. Impact parameters were comparable or better than two traditional polymers (PET and HDPE) and two biopolymers (PLA and biopolymer from starch), showing that this process has excellent potential, from an environmental point of view, of substituting plastic packaging

Environmental assessment of vegetable crops towards the water-energy-food nexus: A combination of precision agriculture and life cycle assessment

The increase in world population and the resulting demand for food, water and energy are exerting increasing pressure on soil, water resources and ecosystems. Identification of tools to minimise the related environmental impacts within the food–energy–water nexus is, therefore, crucial. The purpose of the study is to carry out an analysis of the agri-food sector in order to improve the energy-environmental performance of four vegetable crops (beans, peas, sweet corn, tomato) through a combination of precision agriculture (PA) and life cycle assessment (LCA). Thus, PA strategies were identified and a full LCA was performed on actual and future scenarios for all crops in order to evaluate the benefits of a potential combination of these two tools. In the case study analysed, a life cycle approach was able to target water consumption as a key parameter for the reduced water availability of future climate scenarios and to set a multi-objective function combining also such environmental aspects to the original goal of yield maximisation. As a result, the combination of PA with the LCA perspective potentially allowed the path for an optimal trade-off of all the parameters involved and an overall reduction of the expected environmental impacts in future climate scenarios

Life cycle assessment of hydrogen-powered city buses in the High V.LO-City project: integrating vehicle operation and refuelling infrastructure

During the project High V.LO-City, which ended in December 2019, 14 hydrogen fuel cell buses were operated in four European cities. This paper aims at presenting total emissions through the lifetime of fuel cell buses with different hydrogen production options, including the refuelling stations. The environmental assessment of such bus system is carried out using the life cycle assessment methodology. Three hydrogen production pathways are investigated: water electrolysis, chlor-alkali electrolysis and steam methane reforming. Fuel economy during bus operation is around 10.25 KgH2/100 km, and the refuelling station energy demand ranges between 7 and 9 KWh/KgH2. To support the inventory stage, dedicated software tools were developed for collecting and processing a huge amount of bus data and refuelling station performance, for automating data entry and for impacts calculation. The results show that hydrogen-powered buses, compared to a diesel bus, have the potential to reduce emissions during the use phase, if renewables resources are used. On the other hand, impacts from the vehicle production, including battery pack and fuel cell stack, still dominate environmental load. Consequently, improving the emission profile of fuel cell bus system requires to promote clean electricity sources to supply a low-carbon hydrogen and to sharpen policy focus regarding life cycle management and to counter potential setbacks, in particular those related to problem shifting and to grid improvement. For hazardous emissions and resource use, the high energy intensity of mining and refining activities still poses challenges on how to further enhance the environmental advantages of fuel cells and battery packs

Investigation on the TransientConditions of a Rotating Biological Contactor for Bioethanol Production

Alcoholic fermentations of sucrose solutions were performed in a Rotating BiologicalContactor with immobilized-yeast cells, and the results collected during the transient conditions of start-up are presented and discussed. The analysis and modeling of data constitute a preliminary semi-empirical approach to the study of dynamics of such a bioprocess. The investigation has been developed on the observations of the responses to variations in the operating conditions of substrate, product, suspended- and immobilized- cell concentrations either in the fermentation broth or within a synthetic spongy matrix

Giant infrared intensity of the Peierls mode at the neutral-ionic phase transition

We present exact diagonalization results on a modified Peierls-Hubbard model for the neutral-ionic phase transition. The ground state potential energy surface and the infrared intensity of the Peierls mode point to a strong, non-linear electron-phonon coupling, with effects that are dominated by the proximity to the electronic instability rather than by electronic correlations. The huge infrared intensity of the Peierls mode at the ferroelectric transition is related to the temperature dependence of the dielectric constant of mixed-stack organic crystals.Comment: 4 pages, 4 figure

Profiling Vaccinium macrocarpon components and metabolites in human urine and the urine ex-vivo effect on Candida albicans adhesion and biofilm-formation

The aim of this work was to profile, by using an HPLC-MS/MS method, cranberry compounds and metabolites found in human urine after ingestion of a highly standardized cranberry extract (Anthocran\uae). Two different strategies were adopted for the data analysis: a targeted and an untargeted approach. These strategies allowed the identification of 42 analytes including cranberry components, known metabolites and metabolites hitherto unreported in the literature, including six valerolactones/valeric acid derivatives whose presence in urine after cranberry consumption has never been described before. Absolute concentrations of 26 over 42 metabolites were obtained by using pure available standards. Urine collected at different time points after the last dosage of Anthocran\uae were tested on the reference strain C. albicans SC5314, a biofilm-forming strain. Fractions collected after 12 h were found to significantly reduce the adhesion and biofilm formation compared to the control (p < 0.05). A similar effect was then obtained by using Anthocran\u2122 Phytosome\u2122, the lecithin formulation containing 1/3 of standardized cranberry extract and formulated to enhance the absorption of the cranberry components. The urinary profile of cranberry components and metabolites in the urine fractions collected at 1 h, 6 h and 12 h after the last capsule intake were then reproduced by using the pure standards at the concentration ranges found in the urine fraction, and tested on C. albicans. Only the mixture mimicking the urinary fraction collected at 12 h and containing as main components, quercetin and 5-(3',4'-dihydroxyphenyl)-\u3b3-valerolactone was found effective thus confirming the ex-vivo results

Novel genetic association of TNF-α-238 and PDCD1-7209 polymorphisms with long-term non-progressive HIV-1 infection.

About 2-5% of HIV-1-infected subjects, defined as long-term non-progressors (LTNPs), remain immunologically stable for a long time without treatment. The factors governing this condition are known only in part, and include genetic factors. Thus, we studied 20 polymorphisms of 15 genes encoding proinflammatory and immunoregulatory cytokines, chemokines and their receptors, genes involved in apoptosis, and the gene HCP5. METHODS: We analyzed 47 Caucasian LTNPs infected for >9 years, compared with 131 HIV-1-infected Caucasian patients defined as 'usual progressors'. The genotypes were determined by methods based upon PCR, and the statistical analysis was performed by univariate logistic regression. RESULTS: The well-known CCR5Δ32 del32 allele, the cell death-related TNF-α-238 A and PDCD1-7209 T alleles, and HCP5 rs2395029 G, a non-coding protein associated with the HLA-B*5701, were found positively associated with the LTNP condition. No association was observed for other single nucleotide polymorphisms (SDF-1-801, IL-10-592, MCP-1-2518, CX3CR1 V249I, CCR2V64I, RANTES-403, IL-2-330, IL-1β-511, IL-4-590, FASL IVS3nt-169, FAS-670, FAS-1377, FASL IVS2nt-124, PDCD1-7146, MMP-7-181, and MMP7-153). CONCLUSIONS: The novel genetic associations between allelic variants of genes TNF-α-238 and PDCD1-7209 with the LTNP condition underline the importance of host genetic factors in the progression of HIV-1 infection and in immunological preservation

Investigation on the TransientConditions of a Rotating Biological Contactor for Bioethanol Production

Alcoholic fermentations of sucrose solutions were performed in a Rotating BiologicalContactor with immobilized-yeast cells, and the results collected during the transient conditions of start-up are presented and discussed. The analysis and modeling of data constitute a preliminary semi-empirical approach to the study of dynamics of such a bioprocess. The investigation has been developed on the observations of the responses to variations in the operating conditions of substrate, product, suspended- and immobilized- cell concentrations either in the fermentation broth or within a synthetic spongy matrix